Jump to content


Photo

Cannot access SANmp drives in SANmp Client


  • Please log in to reply
1 reply to this topic

#1 Eric Newbauer

Eric Newbauer

    Advanced Member

  • KB Moderators
  • PipPipPip
  • 257 posts

Posted 16 August 2006 - 04:04 PM

Symptom
Can't login to SANmp.

Resolution
This error usually indicates one of two things

1. You have the wrong username/password for the system, or are using a username/password that does not exist.
2. Your SAN storage is not showing up to the OS

After verifying you are using a valid username/password, check to see if the storage is present.

In OS 9 use HDST to see the disks.
In OS X launch the Disk Utility application.
In Windows look in Disk Management.

If you do not see any disks then you must check your SAN Network for connectivity. If you do see disks, and have a correct password but still cannot log into SANmp, please contact SNS tech support.

Edited by Moderator, 19 August 2006 - 10:24 PM.

Eric Newbauer, SNS Moderator
----
Learn about our SAN/NAS shared media storage products
Follow Studio Network Solutions on Twitter

#2 SNSjason

SNSjason

    Advanced Member

  • KB Moderators
  • PipPipPip
  • 36 posts

Posted 14 February 2012 - 02:17 PM

SANmp version 4 introduces a feature that blocks unconverted SAN volumes from appearing. If your volumes have not been converted yet, or were unconverted, there is a possibility that they will not show up in Disk Management on Windows, even though the SAN connection is correct. If you are seing this behavior, please enable "Allow Unconverted SAN Volumes" and reboot the workstation.

This feature has no effect on volumes that are already SANmp volumes.